<form id="9p9zr"></form>

        <form id="9p9zr"><form id="9p9zr"><th id="9p9zr"></th></form></form>
          <form id="9p9zr"><nobr id="9p9zr"><nobr id="9p9zr"></nobr></nobr></form>

          <address id="9p9zr"><listing id="9p9zr"><meter id="9p9zr"></meter></listing></address>

          <form id="9p9zr"></form>

                康明斯动力设备(深圳)有限公司

                康明斯柴油机参数/康明斯柴油发电机组
                QSK60-G4康明斯柴油发动机参数
                发布时间:2020-11-17 16:06:26  ▏阅读:

                 

                 QSK60-G4康明斯柴油发动机参数

                Cummins Inc.

                Columbus, Indiana 47201

                 

                Engine Data Sheet

                Basic Engine Model:

                QSK60-G4

                Curve Number:

                FR-6345

                G-DRIVE

                QSK 1

                Engine Critical Parts List:

                CPL: 2888

                Date:

                6Feb03

                Displacement : 60.2 litre (3673 in3 )

                Bore : 159 mm (6.25 in.) Stroke : 190 mm (7.48 in.)

                No. of Cylinders : 16

                Aspiration : Turbocharged and Low Temperature Aftercooled (2 Pump / 2 Loop)

                Emissions: Refer to Emission Data Sheet for Details.

                Engine Ratings:

                 

                Engine Speed

                RPM

                Standby Power

                Prime Power

                Continuous Power

                kWm

                BHP

                kWm

                BHP

                kWm

                BHP

                1500

                1915

                2567

                1730

                2319

                1415

                1897

                 

                ENGINE MODEL :   QSK60-G4 CONFIGURATION NUMBER : D593002GX03 DATE : 6Feb03

                PERFORMANCE CURVE : FR-6345

                INSTALLATION DIAGRAM CPL NUMBER

                • Fan to Flywheel :   3170455 Engine Critical Parts List : 2888

                 

                GENERAL ENGINE DATA

                Type................................................................................................................................................................ 4-Cycle; 60° Vee; 16-Cylinder Diesel

                Aspiration Turbocharged and Low Temperature

                Aftercooled (2 Pump / 2 Loop) Bore x Stroke ..............................................................................................................  mm x mm (in x in) 159 x 190 (6.25 x 7.48)

                Displacement..............................................................................................................................  litre (in3) 60.2 (3673)

                Compression Ratio 14.5 : 1

                 

                Dry Weight

                Fan to Flywheel Engine (with SAE 0 Flywheel and Flywheel Housing)..............................  kg (lb) 7185 (15835) Wet Weight

                Fan to Flywheel Engine..........................................................................................................  kg (lb) 7540 (16620)

                 

                Moment of Inertia of Rotating Components

                 

                • with FW 6043 Flywheel (SAE 0) kg m2 (lbm  ft2)

                15.77

                (375.5)

                • with FW 6037 Flywheel (SAE 00) kg m2 (lbm  ft2)

                26.23

                (622.4)

                Center of Gravity from Front Face of Block mm (in)

                1001

                (39.4)

                Center of Gravity Above Crankshaft Centerline mm (in)

                219

                (8.6)

                Maximum Static Loading at Rear Main Bearing kg (lb)

                1134

                2500

                 

                ENGINE MOUNTING

                Maximum Bending Moment at Rear Face of Block .........................................................  N  m (lb  ft) 10350 (7634)

                 

                EXHAUST SYSTEM

                Maximum Back Pressure at 1500 RPM (Standby Power) ..........................................  mm Hg (in Hg) 51 (2)

                 

                AIR INDUCTION SYSTEM

                Maximum Intake Air Restriction

                • with Dirty Filter Element..................................................................................................  kPa (in H2O) 6.2 (25)

                • with Clean Filter Element................................................................................................  kPa (in H2O) 3.7 (15)

                 

                COOLING SYSTEM (Separate Circuit Aftercooling Required)

                Coolant Capacity    Engine litre (US gal)

                157

                (42)

                 Aftercoolers litre (US gal)

                34

                (9)

                Minimum Pressure Cap (for Cooling Systems with less than 2m [6 ft.] Static Head) kPa (psi)

                76

                (11)

                Maximum Static Head of Coolant Above Engine Crank Centerline m (ft)

                18.3

                (60)

                Jacket Water Circuit Requirements:

                Maximum Coolant Friction Head External to Engine  1500 rpm kPa (psi)

                 

                48

                 

                (7)

                Maximum Top Tank Temperature for Standby / Prime Power °C (°F)

                104 / 100

                (220 / 212)

                Thermostat (Modulating) Range °C (°F)

                82 - 93

                (180 - 200)

                Aftercooler Circuit Requirements:

                Maximum Coolant Friction Head External to Engine  1500 rpm kPa (psi)

                 

                35

                 

                (5)

                Maximum Inlet Water Temperature to Aftercoolers @ 25 °C (77 °F) °C (°F)

                49

                (120)

                Maximum Inlet Water Temperature to Aftercoolers °C (°F)

                65

                (150)

                Thermostat (Modulating) Range °C (°F)

                46 - 57

                (115 - 135)

                 

                LUBRICATION SYSTEM

                Oil Pressure   @ Idle Speed kPa (psi)

                138

                (20)

                @ Governed Speed kPa (psi)

                345-483

                (50-70)

                Maximum Oil Temperature °C (°F)

                121

                (250)

                Oil Capacity with OP6073 Oil Pan: Low - High litre (US gal)

                231-261

                (61-69)

                Total System Capacity (with Combo Filters) litre (US gal)

                280

                (74)


                FUEL SYSTEM

                Type Injection System .....................................................................................................................................................................

                Cummins HPI-PT

                 

                Maximum Restriction at PT Fuel Injection Pump  with Clean Fuel Filter mm Hg (in Hg)

                120

                (4.0)

                with Dirty Fuel Filter mm Hg (in Hg)

                203

                (8.0)

                Maximum Allowable Head on Injector Return Line (Consisting of Friction Head and Static Head) mm Hg (in Hg)

                229

                (9.0)

                Maximum Fuel Inlet Temperature °C (°F)

                70

                (160)

                Maximum Fuel Flow to Injection Pump litre / hr (US gph)

                1893

                (500)

                Maximum Drain Flow litre / hr (US gph)

                1855

                (490)

                ELECTRICAL SYSTEM

                Cranking Motor (Heavy Duty, Positive Engagement) .........................................................................................................  volt 24

                Maximum Allowable Resistance of Cranking Circuit.........................................................................................................  ohm .002

                Minimum Recommended Battery Capacity

                • Cold Soak @ 10 °C (50 °F) and Above .............................................................................................................  0°F CCA 1800

                • Cold Soak @ 0 °C to 10 °C (32 °F to 50 °F)......................................................................................................  0°F CCA 1800

                • Cold Soak @ -18 °C to 0 °C (0 °F to 32 °F).......................................................................................................  0°F CCA 2200

                 

                COLD START CAPABILITY

                Minimum Ambient Temperature for Cold Start with  watt Coolant Heater to Rated Speed °C (°F)

                Minimum Ambient Temperature for Unaided Cold Start to Idle Speed °C (°F)

                TBD

                -12

                (TBD)

                (10)

                Minimum Ambient Temperature for NFPA 110 Cold Start (90° F Minimum Coolant Temperature) °C (°F)

                10

                (50)

                 

                PERFORMANCE DATA

                All data is based on:  Engine operating with fuel system, water pump, lubricating oil pump, air cleaner and exhaust silencer; not included are battery charging alternator, fan, and optional driven components.

                • Engine operating with fuel corresponding to grade No. 2-D per ASTM D975.

                • ISO 3046, Part 1, Standard Reference Conditions of:

                Barometric Pressure   :  100 kPa (29.53 in Hg) Air Temperature : 25 °C (77 °F) Altitude :   110 m (361 ft) Relative Humidity : 30%

                 

                Steady State Stability Band at any Constant Load ..............................................................................................................  % +/- 0.25

                Estimated Free Field Sound Pressure Level of a Typical Generator Set;

                Excludes Exhaust Noise; at Rated Load and 7.5 m (24.6 ft); 1500 rpm.................................................................  dBA 93.4 (est.)

                Exhaust Noise at 1 m Horizontally from Centerline of Exhaust Pipe Outlet Upwards at 45° .........................................  dBA 108 (est.)

                 


                以上所有的数据均是基于柴油发电机组带燃油泵、水泵、机油泵、空滤器和消声器运转时获得的,但不带有充电机、空压机、风扇、选用设备和驱动件。
                以上所有的数据都是基于ISO 3046标准参考的条件—海拔110m(361ft),大气压力100kPa(29.53inHg),进气温度25℃ (77°F),相对湿度30%,使用标准No.2号柴油或符合ASTM D975的柴油。
                • 广东分支机构

                • 康明斯动力设备(深圳)有限公司

                • 地址:深圳市龙岗区坪地街道龙岗大道4129号

                • +86-755-84065367 84214948

                • 13600443583    

                • 网址:http://www.cpalpha.com

                • 企业二维码

                • 名片二维码

                分享到:
                深圳市市场监督管理局企业主体身份公示
                手机彩票网 <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>